Free cookie consent management tool by TermsFeed Policy Generator

source: branches/2789_MathNetNumerics-Exploration/HeuristicLab.Algorithms.DataAnalysis.Experimental/sbart/sbart.r.txt @ 17328

Last change on this file since 17328 was 15457, checked in by gkronber, 7 years ago

#2789 added Finbarr O'Sullivan smoothing spline code

File size: 20.1 KB
Line 
1#     This computes the univariate smoothing spline, automatically choosing
2#  the smoothing parameter by minimizing generalized cross validation.  It
3#  was written by Finbarr O'Sullivan using the scheme described in
4#  "Comments on Dr. Silverman's Paper", J. Royal Statistical Society B
5#  (1985) 47, pp.39-40.
6#  This version was installed in netlib 14 Mar 1987.
7#     Remember to check whether your program needs to square or sqrt the
8#  weights before calling this (or any other) least squares routine.
9#    The code has been slightly modified by Trevor Hastie and Eric Grosse
10#  to use de Boor's spline routines from netlib/pppack.  Also, auxiliary
11#  routines "setreg" (for sorting and standardizing the range of the data)
12#  and "sknotl" (for filling the knot array) have been appended.
13
14
15subroutine sbart(xs,ys,ws,n,knot,nk,
16      coef,sz,lev,
17      crit,icrit,spar,ispar,lspar,uspar,tol,
18      isetup,
19      xwy,
20      hs0,hs1,hs2,hs3,
21      sg0,sg1,sg2,sg3,
22      abd,p1ip,p2ip,ld4,ldnk,ier)
23
24
25       # A Cubic B-spline Smoothing routine.
26
27#
28#          The algorithm minimises:
29#
30#      (1/n) * sum ws(i)**2 * (ys(i)-sz(i))**2 + lambda* int ( sz"(xs) )**2 dxs
31#
32#        lambda is a function of the spar which is assumed to be between
33#        0 and 1
34
35
36        # Input
37
38#   n               number of data points
39#  ys(n)      vector of length n containing the observations
40#  ws(n)            vector containing the weights given to each data point
41#  xs(n)            vector containing the ordinates of the observations
42 
43
44#  nk               number of b-spline coefficients to be estimated
45#                   nk <= n+2
46#  knot(nk+4)       vector of knot points defining the cubic b-spline basis.
47
48
49#  spar             penalised likelihood smoothing parameter
50#  ispar            indicator saying if spar is supplied or to be estimated
51#  lspar, uspar     lower and upper values for spar 0.,1. are good values
52#  tol              used in Golden Search routine
53
54#  isetup           setup indicator
55
56#  icrit            indicator saying which cross validation score
57#       is to be computed
58
59#  ld4              the leading dimension of abd (ie ld4=4)
60#  ldnk             the leading dimension of p2ip (not referenced)
61
62
63                # Output
64
65#   coef(nk)       vector of spline coefficients
66#   sz(n)          vector of smoothed z-values
67#   lev(n)         vector of leverages
68#   crit           either ordinary of generalized CV score
69#   ier            error indicator
70#                  ier = 0 ___  everything fine
71#                  ier = 1 ___  spar too small or too big
72#                               problem in cholesky decomposition
73
74
75
76         # Working arrays/matrix
77#   xwy         X'Wy
78#   hs0,hs1,hs2,hs3   the diagonals of the X'WX matrix
79#   sg0,sg1,sg2,sg3   the diagonals of the Gram matrix
80#   abd(ld4,nk)       [ X'WX+lambda*SIGMA] in diagonal form
81#   p1ip(ld4,nk)       inner products between columns of L inverse
82#   p2ip(ldnk,nk)      all inner products between columns of L inverse
83#                          L'L = [X'WX+lambdaSIGMA]  NOT REFERENCED
84
85real      xs(n),ys(n),ws(n),
86    knot(nk+4),
87    coef(nk),sz(n),lev(n),
88    crit,spar,lspar,uspar,tol,
89    xwy(nk),
90    hs0(nk),hs1(nk),hs2(nk),hs3(nk),
91          sg0(nk),sg1(nk),sg2(nk),sg3(nk),
92    abd(ld4,nk),p1ip(ld4,nk),p2ip(ldnk,nk)
93
94
95integer         n,nk,isetup,icrit,ispar,ld4,ldnk,ier
96
97
98
99
100      # Local variables
101
102real      t1,t2,ratio,
103                  a,b,c,d,e,eps,xm,p,q,r,tol1,tol2,u,v,w,
104                  fu,fv,fw,fx,x,
105      ax,bx
106
107integer           i
108
109
110
111
112
113
114
115
116     #  Compute SIGMA, X' W**2 X, X' W**2 z, trace ratio, s0, s1.
117
118                     # SIGMA     -> sg0,sg1,sg2,sg3
119                     # X' W**2 X -> hs0,hs1,hs2,hs3
120                   # X' W**2 Z -> xwy
121
122     if(isetup==0){
123           call sgram(sg0,sg1,sg2,sg3,knot,nk)
124           call stxwx(xs,ys,ws,n,knot,nk,xwy,hs0,hs1,hs2,hs3)
125  # check
126  # print 999;999 format(" got through check ")
127
128
129        t1=0. ; t2=0.
130        do i=3,nk-3 { t1 = t1 + hs0(i) }
131        do i=3,nk-3 { t2 = t2 + sg0(i) }
132        ratio = t1/t2
133
134        isetup = 1 }
135
136  # check 1
137  # print 1999;1999 format(" got through check 1")
138
139
140     # Compute estimate
141
142
143     if(ispar==1) { # Value of spar supplied
144
145    call sslvrg(xs,ys,ws,n,knot,nk,
146          coef,sz,lev,crit,icrit,
147          spar,ratio,
148        xwy,
149          hs0,hs1,hs2,hs3,
150          sg0,sg1,sg2,sg3,
151          abd,p1ip,p2ip,ld4,ldnk,ier)
152  # check 2
153  # print 2999;2999 format(" got through check 2")
154
155        return }
156
157     else         {
158     
159     # Use Forsythe Malcom and Moler routine to minimise criterion
160     
161      ax=lspar ; bx=uspar  # f denotes the value of the criterion
162
163#
164#      an approximation  x  to the point where  f  attains a minimum  on
165#  the interval  (ax,bx)  is determined.
166#
167#
168#  input..
169#
170#  ax  left endpoint of initial interval
171#  bx  right endpoint of initial interval
172#  f   function subprogram which evaluates  f(x)  for any  x
173#  in the interval  (ax,bx)
174#  tol   desired length of the interval of uncertainty of the final
175#  result ( .ge. 0.0)
176#
177#
178#  output..
179#
180#  fmin  abcissa approximating the point where  f  attains a minimum
181#
182#
183#      the method used is a combination of  golden  section  search  and
184#  successive parabolic interpolation.  convergence is never much slower
185#  than  that  for  a  fibonacci search.  if  f  has a continuous second
186#  derivative which is positive at the minimum (which is not  at  ax  or
187#  bx),  then  convergence  is  superlinear, and usually of the order of
188#  about  1.324....
189#      the function  f  is never evaluated at two points closer together
190#  than  eps*abs(fmin) + (tol/3), where eps is  approximately the square
191#  root  of  the  relative  machine  precision.   if   f   is a unimodal
192#  function and the computed values of   f   are  always  unimodal  when
193#  separated by at least  eps*abs(x) + (tol/3), then  fmin  approximates
194#  the abcissa of the global minimum of  f  on the interval  ax,bx  with
195#  an error less than  3*eps*abs(fmin) + tol.  if   f is not unimodal,
196#  then fmin may approximate a local, but perhaps non-global, minimum to
197#  the same accuracy.
198#      this function subprogram is a slightly modified  version  of  the
199#  algol  60 procedure  localmin  given in richard brent, algorithms for
200#  minimization without derivatives, prentice - hall, inc. (1973).
201#
202#
203#      real  a,b,c,d,e,eps,xm,p,q,r,tol1,tol2,u,v,w
204#      real  fu,fv,fw,fx,x
205#
206#  c is the squared inverse of the golden ratio
207#
208      c = 0.5*(3. - sqrt(5.0))
209#
210#  eps is approximately the square root of the relative machine
211#  precision.
212#
213      eps = 1.00
214   10 eps = eps/2.00
215      tol1 = 1.0 + eps
216      if (tol1 .gt. 1.00) go to 10
217      eps = sqrt(eps)
218#
219#  initialization
220#
221      a = ax
222      b = bx
223      v = a + c*(b - a)
224      w = v
225      x = v
226      e = 0.0
227
228    spar = x
229    call sslvrg(xs,ys,ws,n,knot,nk,
230          coef,sz,lev,crit,icrit,
231          spar,ratio,
232        xwy,
233          hs0,hs1,hs2,hs3,
234          sg0,sg1,sg2,sg3,
235          abd,p1ip,p2ip,ld4,ldnk,ier)
236
237      fx = crit
238      fv = fx
239      fw = fx
240#
241#  main loop starts here
242#
243   20 xm = 0.5*(a + b)
244      tol1 = eps*abs(x) + tol/3.0
245      tol2 = 2.0*tol1
246#
247#  check stopping criterion
248#
249      if (abs(x - xm) .le. (tol2 - 0.5*(b - a))) go to 90
250#
251# is golden-section necessary
252#
253      if (abs(e) .le. tol1) go to 40
254#
255#  fit parabola
256#
257      r = (x - w)*(fx - fv)
258      q = (x - v)*(fx - fw)
259      p = (x - v)*q - (x - w)*r
260      q = 2.00*(q - r)
261      if (q .gt. 0.0) p = -p
262      q =  abs(q)
263      r = e
264      e = d
265#
266#  is parabola acceptable
267#
268   30 if (abs(p) .ge. abs(0.5*q*r)) go to 40
269      if (p .le. q*(a - x)) go to 40
270      if (p .ge. q*(b - x)) go to 40
271#
272#  a parabolic interpolation step
273#
274      d = p/q
275      u = x + d
276#
277#  f must not be evaluated too close to ax or bx
278#
279      if ((u - a) .lt. tol2) d = sign(tol1, xm - x)
280      if ((b - u) .lt. tol2) d = sign(tol1, xm - x)
281      go to 50
282#
283#  a golden-section step
284#
285   40 if (x .ge. xm) e = a - x
286      if (x .lt. xm) e = b - x
287      d = c*e
288#
289#  f must not be evaluated too close to x
290#
291   50 if (abs(d) .ge. tol1) u = x + d
292      if (abs(d) .lt. tol1) u = x + sign(tol1, d)
293
294    spar = u
295    call sslvrg(xs,ys,ws,n,knot,nk,
296          coef,sz,lev,crit,icrit,
297          spar,ratio,
298        xwy,
299          hs0,hs1,hs2,hs3,
300          sg0,sg1,sg2,sg3,
301          abd,p1ip,p2ip,ld4,ldnk,ier)
302
303      fu = crit
304#
305#  update  a, b, v, w, and x
306#
307      if (fu .gt. fx) go to 60
308      if (u .ge. x) a = x
309      if (u .lt. x) b = x
310      v = w
311      fv = fw
312      w = x
313      fw = fx
314      x = u
315      fx = fu
316      go to 20
317   60 if (u .lt. x) a = u
318      if (u .ge. x) b = u
319      if (fu .le. fw) go to 70
320      if (w .eq. x) go to 70
321      if (fu .le. fv) go to 80
322      if (v .eq. x) go to 80
323      if (v .eq. w) go to 80
324      go to 20
325   70 v = w
326      fv = fw
327      w = u
328      fw = fu
329      go to 20
330   80 v = u
331      fv = fu
332      go to 20
333#
334#  end of main loop
335#
336   90 continue ; spar = x ; crit = fx
337      return         }
338
339
340
341
342
343return
344end
345subroutine sgram(sg0,sg1,sg2,sg3,tb,nb)
346
347real             sg0(nb),sg1(nb),sg2(nb),sg3(nb),tb(nb+4),
348     vnikx(4,3),work(16),yw1(4),yw2(4),
349     wpt
350
351integer   nb,ileft,ilo,mflag,
352    i,ii,jj   # indices
353
354
355    #PURPOSE
356
357#   Calculation of the cubic B-spline smoothness prior
358#   for "usual" interior knot setup.
359
360
361# Uses BSPVD and INTRV in the CMLIB
362
363
364
365
366# sgm[0-3](nb)    Symmetric matrix
367#                       whose (i,j)'th element contains the integral of
368#                       B''(i,.) B''(j,.) , i=1,2 ... nb and j=i,...nb.
369#                       Only the upper four diagonals are computed.
370
371
372  #Initialise the sigma vectors
373    do i=1,nb{ sg0(i)=0.;sg1(i)=0.;sg2(i)=0.;sg3(i)=0.}
374 
375    ilo = 1
376
377  do i=1,nb {
378
379                # Calculate a linear approximation to the
380    # second derivative of the non-zero B-splines
381    # over the interval [tb(i),tb(i+1)].
382
383      #call intrv(tb(1),(nb+1),tb(i),ilo,ileft,mflag)
384      call interv(tb(1),(nb+1),tb(i),ileft,mflag)
385
386
387            #Left end second derivatives
388      #call bspvd (tb,4,3,tb(i),ileft,4,vnikx,work)
389      call bsplvd (tb,4,tb(i),ileft,work,vnikx,3)
390
391            # Put values into yw1
392      do ii=1,4 { yw1(ii) = vnikx(ii,3) }
393
394 
395            #Right end second derivatives
396      #call bspvd (tb,4,3,tb(i+1),ileft,4,vnikx,work)
397      call bsplvd (tb,4,tb(i+1),ileft,work,vnikx,3)
398
399
400    # Slope*(length of interval) in Linear Approximation to B''
401      do ii=1,4 { yw2(ii) = vnikx(ii,3) - yw1(ii)  }
402            wpt = tb(i+1) - tb(i)
403
404
405# Calculate Contributions to the simga vectors
406
407if(ileft>=4){
408do ii=1,4 {
409
410jj=ii
411sg0(ileft-4+ii) = sg0(ileft-4+ii) +
412wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
413yw2(ii)*yw2(jj)*.3330 )
414jj=ii+1
415if(jj<=4) {sg1(ileft+ii-4) = sg1(ileft+ii-4) +
416wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
417yw2(ii)*yw2(jj)*.3330 )}
418jj=ii+2
419if(jj<=4) {sg2(ileft+ii-4) = sg2(ileft+ii-4) +
420wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
421yw2(ii)*yw2(jj)*.3330 )}
422jj=ii+3
423if(jj<=4) {sg3(ileft+ii-4) = sg3(ileft+ii-4) +
424wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
425yw2(ii)*yw2(jj)*.3330 )}
426
427          }
428    }
429
430else if(ileft==3){
431do ii=1,3 {
432
433jj=ii
434sg0(ileft-3+ii) = sg0(ileft-3+ii) +
435wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
436yw2(ii)*yw2(jj)*.3330 )
437jj=ii+1
438if(jj<=3) {sg1(ileft+ii-3) = sg1(ileft+ii-3) +
439wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
440yw2(ii)*yw2(jj)*.3330 )}
441jj=ii+2
442if(jj<=3) {sg2(ileft+ii-3) = sg2(ileft+ii-3) +
443wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
444yw2(ii)*yw2(jj)*.3330 )}
445
446          }
447    }
448
449else if(ileft==2){
450do ii=1,2 {
451
452jj=ii
453sg0(ileft-2+ii) = sg0(ileft-2+ii) +
454wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
455yw2(ii)*yw2(jj)*.3330 )
456jj=ii+1
457if(jj<=2) {sg1(ileft+ii-2) = sg1(ileft+ii-2) +
458wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
459yw2(ii)*yw2(jj)*.3330 )}
460
461          }
462    }
463
464else if(ileft==1){
465do ii=1,1 {
466
467jj=ii
468sg0(ileft-1+ii) = sg0(ileft-1+ii) +
469wpt* (yw1(ii)*yw1(jj) + (yw2(ii)*yw1(jj) + yw2(jj)*yw1(ii))*.50  +
470yw2(ii)*yw2(jj)*.3330 )
471
472          }
473    }}
474
475
476return
477end
478subroutine sinerp(abd,ld4,nk,p1ip,p2ip,ldnk,flag)
479
480real  abd(ld4,nk),p1ip(ld4,nk),p2ip(ldnk,nk),
481  wjm3(3),wjm2(2),wjm1(1),c0,c1,c2,c3
482
483integer flag,ld4,nk,ldnk,i,j,k
484
485
486
487
488  # Purpose :  Computes Inner Products between columns of L(-1)
489  #      where L = abd is a Banded Matrix with 3 subdiagonals
490
491  # The algorithm works in two passes:
492  #
493  #   Pass 1 computes (cj,ck) k=j,j-1,j-2,j-3 ,j=nk, .. 1
494  #   Pass 2 computes (cj,ck) k<=j-4  (If flag == 1 ).
495  #
496  #   A refinement of Elden's trick is used.
497  #
498
499
500
501
502      # Pass 1
503
504
505      wjm3(1)=0. ; wjm3(2)=0. ; wjm3(1)=0.
506      wjm2(1)=0. ; wjm2(2)=0.
507      wjm1(1)=0.
508
509    do i=1,nk { j=nk-i+1
510
511                   c0 = 1./abd(4,j)
512      if(j<=nk-3) {c1 = abd(1,j+3)*c0
513                   c2 = abd(2,j+2)*c0
514             c3 = abd(3,j+1)*c0 }
515       else if(j==nk-2) {c1 = 0.
516                   c2 = abd(2,j+2)*c0
517             c3 = abd(3,j+1)*c0 }
518       else if(j==nk-1) {c1 = 0.
519                   c2 = 0.
520             c3 = abd(3,j+1)*c0 }
521       else if(j==nk)   {c1 = 0.
522                   c2 = 0.
523             c3 = 0.}
524
525
526    p1ip(1,j) = 0. - (c1*wjm3(1)+c2*wjm3(2)+c3*wjm3(3))
527    p1ip(2,j) = 0. - (c1*wjm3(2)+c2*wjm2(1)+c3*wjm2(2))
528    p1ip(3,j) = 0. - (c1*wjm3(3)+c2*wjm2(2)+c3*wjm1(1))
529
530    p1ip(4,j) = c0**2 +
531    c1**2*wjm3(1)+2.*c1*c2*wjm3(2)+2.*c1*c3*wjm3(3) +
532    c2**2*wjm2(1)+2.*c2*c3*wjm2(2) +
533    c3**2*wjm1(1)
534
535      wjm3(1)=wjm2(1) ; wjm3(2)=wjm2(2) ; wjm3(3)=p1ip(2,j)
536      wjm2(1)=wjm1(1) ; wjm2(2)=p1ip(3,j)
537      wjm1(1)=p1ip(4,j)
538
539        }
540
541
542  if(flag==0) {return}
543
544
545       # Pass 2
546
547
548  else      { # Compute p2ip
549
550      do i=1,nk { j=nk-i+1
551      for(k=1;k<=4 & j+k-1<=nk;k=k+1)
552      { p2ip(j,j+k-1) = p1ip(5-k,j) }}
553   
554
555      do i=1,nk { j=nk-i+1
556      for(k=j-4;k>=1;k=k-1){
557
558      c0 = 1./abd(4,k) ; c1 = abd(1,k+3)*c0
559      c2 = abd(2,k+2)*c0 ; c3 = abd(3,k+1)*c0
560           
561      p2ip(k,j) = 0. - ( c1*p2ip(k+3,j)  +
562               c2*p2ip(k+2,j)  +
563               c3*p2ip(k+1,j)  )  }
564          }
565
566      return
567
568      }
569
570
571end
572subroutine sslvrg(x,y,w,n,knot,nk,
573      coef,sz,lev,
574      crit,icrit,
575      spar,ratio,
576      xwy,
577      hs0,hs1,hs2,hs3,
578      sg0,sg1,sg2,sg3,
579      abd,p1ip,p2ip,ld4,ldnk,info)
580
581
582real     x(n),y(n),w(n),
583   knot(nk+4),
584   coef(nk),sz(n),lev(n),
585   crit,
586   ratio,spar,
587   xwy(nk),
588   hs0(nk),hs1(nk),hs2(nk),hs3(nk),
589         sg0(nk),sg1(nk),sg2(nk),sg3(nk),
590   abd(ld4,nk),p1ip(ld4,nk),p2ip(ldnk,nk),
591   lambda,
592   b0,b1,b2,b3,eps,
593   vnikx(4,1),work(16),
594  # xv,bvalu,rss,df
595   xv,bvalu2,rss,df
596
597
598
599integer  n,nk,icrit,ld4,ldnk,i,icoef,ileft,ilo,info,j,mflag
600
601         ilo = 1 ; eps = .1e-10
602
603    # Purpose : Solves the smoothing problem and computes the
604    #           criterion function (OCV or GCV).
605
606
607  # The coeficients of estimated smooth
608
609                        lambda = ratio*16.**(-2. + spar*(6.))
610
611          do i=1,nk     { coef(i)    = xwy(i) }
612          do i=1,nk     { abd(4,i)   = hs0(i)+lambda*sg0(i) }
613          do i=1,(nk-1) { abd(3,i+1) = hs1(i)+lambda*sg1(i) }
614          do i=1,(nk-2) { abd(2,i+2) = hs2(i)+lambda*sg2(i) }
615          do i=1,(nk-3) { abd(1,i+3) = hs3(i)+lambda*sg3(i) }
616
617
618    call spbfa(abd,ld4,nk,3,info)
619    if(info.ne.0) { return }
620    call spbsl(abd,ld4,nk,3,coef)
621
622
623  # Value of smooth at the data points
624
625                     icoef = 1
626          do i=1,n {    xv = x(i)
627       #sz(i) = bvalu(knot,coef,
628       #               nk,4,0,xv,icoef,work(1)) }
629       sz(i) = bvalu2(knot,coef,
630                      nk,4,xv,0)
631             }
632
633
634  # Compute the criterion function if requested
635
636    if(icrit==0) { return}
637
638    else         { # Ordinary or Generalized CV
639
640                   # Get Leverages First
641
642        call sinerp(abd,ld4,nk,p1ip,p2ip,ldnk,0)
643
644     do i=1,n { xv = x(i)
645          #call intrv(knot(1),(nk+1),xv,ilo,ileft,mflag)
646          call interv(knot(1),(nk+1),xv,ileft,mflag)
647
648          if(mflag==-1) { ileft = 4   ; xv = knot(4)+eps }
649          if(mflag==1)  { ileft = nk  ; xv = knot(nk+1)-eps }
650          j=ileft-3
651                #call bspvd(knot,4,1,xv,ileft,4,vnikx,work)
652                call bsplvd(knot,4,xv,ileft,work,vnikx,1)
653
654          b0=vnikx(1,1);b1=vnikx(2,1);b2=vnikx(3,1);b3=vnikx(4,1)
655
656  lev(i) = (p1ip(4,j)*b0**2   + 2.*p1ip(3,j)*b0*b1 +
657           2.*p1ip(2,j)*b0*b2 + 2.*p1ip(1,j)*b0*b3 +
658      p1ip(4,j+1)*b1**2 + 2.*p1ip(3,j+1)*b1*b2 +
659           2.*p1ip(2,j+1)*b1*b3 +
660      p1ip(4,j+2)*b2**2 + 2.*p1ip(3,j+2)*b2*b3 +
661      p1ip(4,j+3)*b3**2 )*w(i)**2      }
662
663
664       
665
666
667  # Evaluate Criterion
668
669        if(icrit==1) { # Generalized CV
670         
671                      rss = 0. ; df = 0.
672           do i=1,n { rss = rss + ((y(i)-sz(i))*w(i))**2}
673           do i=1,n { df  = df  + 1.-lev(i)}
674           crit = (rss/n)/((df/n)**2)       }
675
676        else         { # Ordinary CV
677         
678                      crit = 0.
679           do i=1,n { crit = crit +
680                      (((y(i)-sz(i))*w(i))/(1-lev(i)))**2 }}
681
682
683                        return }
684
685end
686subroutine stxwx(x,z,w,k,xknot,n,y,hs0,hs1,hs2,hs3)
687
688real             z(k),w(k),x(k),
689     xknot(n+4),
690     y(n),
691     hs0(n),hs1(n),hs2(n),hs3(n),
692               
693     eps,vnikx(4,1),work(16)     # local
694
695integer          k,n,
696
697     j,i,ilo,ileft,mflag       # local
698
699
700
701
702     # Initialise the output vectors
703
704     do i=1,n { y(i)=0. ; hs0(i)=0. ; hs1(i)=0.
705        hs2(i)=0. ; hs3(i)=0. }
706
707
708     # Compute X'WX -> hs0,hs1,hs2,hs3  and X'WZ -> y
709
710  ilo=1  ; eps = .1e-9
711
712     do i=1,k {
713
714        #call intrv(xknot(1),(n+1),x(i),ilo,ileft,mflag)
715        call interv(xknot(1),(n+1),x(i),ileft,mflag)
716  # check
717  # print 999;999 format(" got through check stxwx1")
718
719
720        if(mflag==-1) {write(6,'("Error in hess ",i2)')mflag;stop}
721        if(mflag== 1) {if(x(i)<=(xknot(ileft)+eps)){ileft=ileft-1}
722         else{write(6,'("Error in hess ",i2)')mflag;stop}}
723
724
725              #call bspvd (xknot,4,1,x(i),ileft,4,vnikx,work)
726              call bsplvd (xknot,4,x(i),ileft,work,vnikx,1)
727  # check 2
728  # print 2999;2999 format(" got through check2 stxwx ")
729
730
731
732        j= ileft-4+1
733         y(j) =  y(j)+w(i)**2*z(i)*vnikx(1,1)
734        hs0(j)=hs0(j)+w(i)**2*vnikx(1,1)**2
735        hs1(j)=hs1(j)+w(i)**2*vnikx(1,1)*vnikx(2,1)
736        hs2(j)=hs2(j)+w(i)**2*vnikx(1,1)*vnikx(3,1)
737        hs3(j)=hs3(j)+w(i)**2*vnikx(1,1)*vnikx(4,1)
738
739        j= ileft-4+2
740         y(j) =  y(j)+w(i)**2*z(i)*vnikx(2,1)
741        hs0(j)=hs0(j)+w(i)**2*vnikx(2,1)**2
742        hs1(j)=hs1(j)+w(i)**2*vnikx(2,1)*vnikx(3,1)
743        hs2(j)=hs2(j)+w(i)**2*vnikx(2,1)*vnikx(4,1)
744
745        j= ileft-4+3
746         y(j) =  y(j)+w(i)**2*z(i)*vnikx(3,1)
747        hs0(j)=hs0(j)+w(i)**2*vnikx(3,1)**2
748        hs1(j)=hs1(j)+w(i)**2*vnikx(3,1)*vnikx(4,1)
749
750        j= ileft-4+4
751         y(j) =  y(j)+w(i)**2*z(i)*vnikx(4,1)
752        hs0(j)=hs0(j)+w(i)**2*vnikx(4,1)**2  }
753
754return
755end
756subroutine sknotl(x,n,knot,k)
757
758real        x(n),knot(n+6),a1,a2,a3,a4
759integer     n,k,ndk,j
760
761
762     # Allocate knots acording to the cutoffs given below
763
764
765  # Cutoff constants
766
767   a1 = log(50.)/log(2.)  ; a2 = log(100.)/log(2.)
768   a3 = log(140.)/log(2.) ; a4 = log(200.)/log(2.)
769
770  # Cutoff Criteria
771
772        if(n<50)                    { ndk = n }
773        else if (n>=50  & n<200)    { ndk = 2.**(a1+(a2-a1)*(n-50.)/150.)  }
774        else if (n>=200 & n<800)    { ndk = 2.**(a2+(a3-a2)*(n-200.)/600.)  }
775        else if (n>=800 & n<3200)   { ndk = 2.**(a3+(a4-a3)*(n-800.)/2400.)  }
776        else if (n>=3200)           { ndk = 200. + (n-3200)**.2 }
777     
778     k = ndk + 6
779
780     
781     # Allocate Knots  ( note no account is taken of any weighting vector )
782
783  do j=1,3   { knot(j) = x(1) }
784  do j=1,ndk { knot(j+3) = x( 1 + (j-1)*(n-1)/(ndk-1) ) }
785  do j=1,3   { knot(ndk+3+j) = x(n) }
786
787return
788end
789subroutine setreg(x,y,w,n,xw,nx,min,range,knot,nk)
790
791# sbart uses the square of the weights; the following rectifies that.
792# Also, the data is sorted (by a routine you may need to change for
793# your local machine) and standardized so that spar=1 gives a smooth fit
794# with sum(leverage values) about 2-4.
795
796real       x(n),y(n),w(n),xw(n),
797     min,range,knot(n+6)
798
799integer    n,nk,nx
800
801
802       # Local
803
804real      eps
805integer   ycnt,i,k
806
807
808      call scopy(n,x,1,xw,1)
809      #call ssort(x,w,n,2)
810      #call ssort(xw,y,n,2)
811    call sortpr(x,n,w)
812    call sortpr(xw,n,y)
813
814              range = x(n)-x(1) ; min = x(1) ; eps = .1e-9
815      do i=1,n { x(i) = (x(i)-min)/range }
816      call scopy(n,x,1,xw,1)
817
818
819    nx = 1 ; x(nx) = x(1) ; w(nx) = w(1) ; y(nx) = y(1)*w(1) ;
820
821    for(i=2;i<=n;i=i+1)
822
823        { if(xw(i)>x(nx)+eps)
824      { if(w(nx)>0.0) y(nx) = y(nx)/w(nx)
825           nx = nx + 1
826           x(nx) = x(i)
827           y(nx) = y(i)*w(i)
828           w(nx) = w(i) }
829        else
830      { y(nx) = y(nx)+y(i)*w(i)
831        w(nx) = w(nx) + w(i) }
832        }
833  if(w(nx)>0.0) y(nx) = y(nx)/w(nx)
834
835  for(i=1;i<=nx;i=i+1)
836    { if (w(i)>0) w(i)=sqrt(w(i)) }
837
838
839      call sknotl(x,nx,knot,k) ; nk = k-4
840
841
842
843
844return
845end
846
847
Note: See TracBrowser for help on using the repository browser.